Makita LS1016 Technical Information page 15

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Safety lock mechanism
ASSEMBLING
(1) Assemble Safety lock mechanism as illustrated in Fig. 32.
(2) Adjust the position of Lock lever as illustrated in Fig. 33.
Fig. 32
Insert Rod 8 into Rod holder,
and set Rod holder to Blade case.
Stop ring E-6
rod 8
Rod holder Blade case
Fig. 33
Lock lever
Safety cover B
While pushing Rod holder toward
the rib of Blade case, secure Rod
holder with 4x16 Tapping screw (2pcs.).
And assemble Torsion spring 8.
4x16 Tapping
rib of
screw (2pcs.)
Blade case
Torsion spring 8
After leaving a 2 up to 3mm clearance between Lock lever
and Safety cover B, secure Lock lever by tightening M4x10
Pan head screw (2pcs.).
Safety
cover B
Pretighten M4x10 Pan head screw
(2pcs.) to fasten Lock lever and Rod 8.
M4x10 Pan
head screw (2pcs.)
Rod 8
Lock lever
2 - 3mm
P 15/ 37
Lock lever