Usb Tethering - NETGEAR AirCard 810 Mobile Hotspot User Manual

Note: The touch screen goes into sleep mode after a set time to extend
battery life. To wake the touch screen, press and quickly release the
Power button.

USB Tethering

Use USB tethering to connect to the Internet from supported computers with a USB cable
and charge the mobile hotspot battery at the same time.
Note: The first time that you use your mobile hotspot in tethered mode,
drivers are loaded on your computer to support the mobile hotspot.
For more information, see
page 20.
Turn off USB tethering if you only want to charge your mobile hotspot with your computer.

To connect the mobile hotspot to the USB port on your computer:
Attach one end of the micro USB cable to the mobile hotspot and plug the other end into
the USB port on your computer.

To enable USB tethering from the touch screen:
1. To wake the device, press the Power button.
AirCard 810 Mobile Hotspot
Install Drivers for Tethered Mode
Use Your Mobile Hotspot
56
on