Enable VPN Pass-Through
To connect to a corporate network using VPN, you must first enable VPN connections
(pass-through).
To enable VPN pass-through:
1.
From a computer or WiFi device that is connected to your network, launch an Internet
browser.
2.
Enter http://netgear.aircard or http://192.168.1.1.
Your device might use a different web address. To get the web address for your device,
tap Settings > More > Device Information > AC810S Manager or look at the label
under the device battery.
A login window opens.
3.
Enter the administrator login password.
The default password is password. The password is case-sensitive.
The home screen displays.
4.
Select Settings > Router > Basic.
The Basic page displays.
5.
In the LAN section, select the VPN Passthrough On radio button.
The Submit button displays after you make a selection.
6.
Click the Submit button.
Your settings are saved.
Configure APN Details
Your mobile hotspot comes preconfigured with the access point name (APN) for your
network service provider.
The mobile hotspot checks the APN to determine the type of network connection to establish.
To add an APN for another network:
1.
From a computer or WiFi device that is connected to your network, launch an Internet
browser.
2.
Enter http://netgear.aircard or http://192.168.1.1.
Your device might use a different web address. To get the web address for your device,
tap Settings > More > Device Information > AC810S Manager or look at the label
under the device battery.
A login window opens.
AirCard 810 Mobile Hotspot
Advanced Settings
91