Usb Tethering - NETGEAR AirCard 790 User Manual

Note: The touch screen goes into sleep mode after a set time to extend
battery life. To wake the touch screen, press and quickly release the
Power key.

USB Tethering

Use USB tethering to connect to the Internet from supported computers with a USB cable
and charge the hotspot battery at the same time.
Turn off USB tethering if you only want to charge your hotspot with your computer.

To connect the hotspot to the USB port on your computer:
Attach one end of the micro USB cable to the mobile hotspot and plug the other end into
the USB port on your computer.

To enable USB tethering from the touch screen:
1. To wake the device, press the Power key.
2. Tap the Home ( ) button.
AirCard 790 Mobile Hotspot
Use Your Mobile Hotspot
58