Disable Wi-Fi When Tethering Device (Connected Through Usb) - NETGEAR Mingle 3C4C38D7 User Manual

IMPORTANT: Make sure you add the computer you are using, or else you will not be able to
access the network after your device resets.
7. Click Submit.
Specifying Computers That Are Not Allowed to Access the Network
1. Log in to the home page. (See
2. Click Wi-Fi > MAC Filter.
3. Beside MAC Filter Mode, select Black list.
4. Determine and block an undesired user of your network:
a. In the Connected Devices section, if you see a device you don't recognize,
you can click its name and compare its MAC address to the MAC address of
each of the devices on your network.
To determine the MAC address of each device you have, see
MAC
might be an intruder.
b. In the empty Name field, enter a name for the device. For example, "Amy's
PC".
c. In the empty MAC Address field, enter the MAC address of the device you're
adding to the list.
d. Click the
5. For each device you want to block, repeat step 4.
Tip: You can also block the device from the device list. See
Connected Devices (Block List)
Removing a Device From the Allowed or Disallowed Lists
1. Log in to the home page. (See
2. Click Wi-Fi > MAC Filter.
3. In the list of allowed/disallowed devices, click the
4. Click Submit.

Disable Wi-Fi When Tethering Device (Connected Through USB)

You can turn off your device's Wi-Fi radio when connected via the micro-USB cable ('tethered').
This is done from the Mingle Manager's Wi-Fi Options tab.
Configuring the Wi-Fi Network
Logging In as an
Address. If none of your devices have this MAC address, that device
beside the row.
Logging In as an
Administrator.)
Displaying and Blocking Currently
Administrator.)
beside the row.
Finding the
96