3
3: Advanced Settings
This chapter provides information on how to change advanced settings.
The advanced settings enable you to configure various aspects of the
device such as Wi-Fi settings, WAN settings, router settings, etc.
Hotspot software
Install driver for USB tethering
By default, a host driver is installed the first time you connect your mobile
hotspot to the computer via the USB cable. This driver enables the mobile
hotspot to connect to the Internet when it is tethered to a USB port on
the computer via the USB cable instead of using the Wi-Fi network.
If you do not want to use this feature and want to use the USB cable only
to charge the mobile hotspot battery, you can set the host driver not to
install.
To set the host driver not to install:
1. On the Unite Manager homepage, log in as Administrator.
2. Click Settings > Device > Software and Reset.
3. In the Startup Options section, clear the checkbox beside Install driver
when connecting to Windows or MAC computers with a USB cable.
4. Click Submit. (Submit button appears once you make a selection.)
Rev 1 Jun.13
43