Connect To Wifi From A Wifi Device - NETGEAR AirCard 810 Mobile Hotspot User Manual

Connect to WiFi From a WiFi Device

You can connect up to 15 WiFi devices (such as smartphones, laptops, tablets, digital
cameras, printers, gaming consoles, and digital picture frames) to your mobile hotspot
network. For information about setting connections for main WiFi and guest WiFi networks,
see Set the Maximum Number of Connected Devices
You can add a WiFi device to your WiFi network manually. If the device that you are adding is
WPS enabled, you can use the WPS method to connect the device without using the WiFi
password.
Connect With the WiFi Password
1. On the WiFi device, view the list of available WiFi networks.
2. Connect to the network that corresponds to your mobile hotspot network as displayed on the
touch screen.
3. When prompted, enter the WiFi password for your mobile hotspot network.
The WiFi password displays on the mobile hotspot touch screen. If the screen is turned
off, press and quickly release the Power button to wake the mobile hotspot.
Add a WPS-Enabled Device
You can add a WPS-enabled WiFi device to your WiFi network without a WiFi password,
using the mobile hotspot web page or the touch screen.

To add a WPS-enabled WiFi device from the touch screen:
1. To wake the device, press the Power button.
2. Tap the Home ( ) button.
3. Tap the WiFi button.
AirCard 810 Mobile Hotspot
on page 39.
Use Your Mobile Hotspot
34