Table of Contents
Advertisement
Set Up Access Control From a Web Browser
To set up access control:
1. From a computer that is connected to your network, launch a web browser.
2. Enter http://mywebui.net or http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
The password is case-sensitive.
The dashboard displays.
4. Select SETTINGS > Security > Access Control.
The Access Control page displays.
5. Select the Enable check box.
6. In the Filter Type menu, select White List or Black List.
Depending on your selection, the page displays an Allow List or a Block List.
7. To add a device to the list, click the ADD button and select the device.
The device is added to the list.
8. To remove a device from the list, select the device and then click the DELETE button.
The device is removed from the list.
Turn Off USB Tethering
USB tethering lets you connect to the Internet from supported computers with a USB
cable and charge the mobile router battery at the same time.
Figure 6. Mobile router tethered to a laptop computer
Turn off USB tethering if you only want to charge your mobile router with your computer.
Control Internet Access
Nighthawk M5 5G WiFi 6 Mobile Router
40
User Manual
Advertisement
Table of Contents
