Internal Pci-X Hot Plug Leds And Button - HP ProLiant DL580 Setup And Installation Manual

System LEDs and Switches
Figure E-6: Internal PCI-X Hot Plug LEDs and button
Table E-7: Internal PCI-X Hot Plug LEDs and Button
Item
1
2
3
Note: If the any of the LEDs indicates an error, refer to Chapter 7, "PCI-X Technology" or
Appendix H, "Troubleshooting," for more information.
E-8
Description
Slot fault LED (amber)
Slot power LED (green)
PCI-X Hot Plug button (port)
HP ProLiant DL580 Generation 2 Server Setup and Installation Guide
Status
On = Slot requires attention. There may be a
problem with the slot, the PCI-X board, or the
driver. Check the green LED before opening the
slot.
Off = Slot does not require attention.
On = Power is applied to the slot. Do not open.
Blinking = Power to slot is being turned off or on.
This process may take several minutes. Do not
open the slot release lever until the green LED is
completely off. Do not open.
Off = You may replace or remove a board in this
slot only.