Removing A Drive From Bay 1 - HP ProLiant DL580 Setup And Installation Manual

Installing Hardware Options
Table 5-6: Slimline Drive Bays
Item Description
1
Eject button for slimline
drive bay 1
2
Slimline drive bay 1
Removing a Media Drive
To remove a media drive:
1. Power down the server. Refer to "Powering Down the Server" in this chapter.
2. Use the Torx T-15 tool to press the appropriate ejection button (1), and pull the
drive out of the bay (2).
Figure 5-31: Removing a drive from bay 1
5-38
Item
3
4
HP ProLiant DL580 Generation 2 Server Setup and Installation Guide
Description
Slimline drive bay 2
Eject button for slimline
drive bay 2