Integrated Management Log; Identifying Severity Levels; Viewing The Log - HP ProLiant DL580 Setup And Installation Manual

Integrated Management Log

The Integrated Management Log (IML) records hundreds of events and stores them
in an easy-to-view form. The IML time-stamps each event with one-minute
granularity.

Identifying Severity Levels

Events listed in the IML are categorized as one of four event severity levels:
•
Status—indicates that the message is informational only
•
Repaired—indicates that corrective action was taken
•
Caution—indicates a non-fatal error condition occurred
•
Critical—indicates a component failure has occurred
IML requires HP operating-system-dependent drivers. Refer to the ProLiant
Essentials Foundation Pack for instructions on installing the appropriate drivers.

Viewing the Log

You can view recorded events in the IML in several ways, including the following:
•
From within the Insight Manager 7
•
From within the Survey Utility
•
From within operating-system-specific IML viewers
— For NetWare, HP IML Viewer
— For Windows NT, Event Viewer or HP IML Viewer
— For Linux, HP IML Viewer Application
HP ProLiant DL580 Generation 2 Server Setup and Installation Guide
Server Configuration and Utilities
10-19