Compliance With International Regulations; Laser Product Label; Laser Information - HP ProLiant DL580 Setup And Installation Manual

Compliance with International Regulations

All HP systems equipped with laser devices comply with appropriate safety standards
including IEC 825.

Laser Product Label

The following label or equivalent is located on the surface of the HP supplied laser
device.

Laser Information

HP ProLiant DL580 Generation 2 Server Setup and Installation Guide
Laser Type
Wave Length
Divergence Angle
Output Power
Polarization
Numerical Aperture
Regulatory Compliance Notices
This label indicates that the
product is classified as a CLASS
1 LASER PRODUCT. This label
appears on a laser device
installed in your product.
Semiconductor GaAIAs
780 nm +/- 35 nm
53.5 degrees +/- 0.5 degrees
Less than 0.2 mW or 10,869 W·m-2 sr-1
Circular 0.25
0.45 inches +/- 0.04 inches
A-7