Toshiba GR-200-5 Instruction Manual page 497

Figure 4.1-53 LN editing screen for SBO mode
Defining DIR mode
Figure 4.1-54 exemplifies the SPOS logic node saved as "CSWI1". In the DIR mode, the
following three items should be selected using GR-TIEMS.
Figure 4.1-54 LN editing screen for DIR mode
Mapping output data
(ii)
The user should group the DPSY01 signals with regard to GOOSE and REPORT; the user
should map them for IEC61850 communication using GR-TIEMS. Figure 4.1-55 illustrates
how to map a signal; it indicates that the signals for the DPSY01 function are required to be
mapped for IEC 61850 communications.
✓
SBOw
✓ Oper
✓
Cancel
✓
origin
✓ stSeld
✓
sboClass† (choice "operate-once")
✓
ctlmodel (choice "SBOes or SBOns")
†"sboClass" can be found by scrolling down.
✓ Oper
✓ origin
✓
ctlmodel (choice "DOes or DOns" )
- 477 -
6F2T0207 (0.01)
GRE200 (5,6)