Toshiba GR-200-5 Instruction Manual page 423

Object_reference
System/LLN0$Mod$origin
System/LLN0$Mod$origin
System/LLN0$Mod
Figure 3.6-4 orCat attribute mapped into MOD object of LLNO
Mapping input data
(iii)
The MDCTRL01 function can receive three commands "select, operate, and cancel. Thus, the
user should map the input-point "MDCTRL01
MDCTRL01
point "
should map the Object reference having
the user should map the input-point to all attributes having CO and CF
how to map a signal.
Table 3.6-3 Mapping signals for MOD object.
Attribute Type
orCat orCategory
orIdent Octet64
stSeld BOOLEAN
_CONTROL_REQ" and the Object reference
attributes CO and CF in FC
- 403 -
FC Signal Number
ST 5500013013011000
ST 5500016A13011009
ST 5500010013011D90
Table 3.6-4
_CONTROL_REQ".
"System/LLN0$Mod$"
to the input-point
6F2T0207 (0.01)
Signal Name
MDCTRL01_ORCAT
MDCTRL01_ORIDENT
MDCTRL01_SLD_RPT
Drag and drop
shows the input-
; the user
. Note that
shows
. Figure below
GRE200 (5,6)