Examples of shutdown settings
The following examples demonstrate some common scenarios that you can implement
with the Shutdown Set feature of the System Startup/Shutdown Settings window.
System available during the night
To have both the computer and analyzer available for night emergencies, use the
following:
System p.s.
System
PRIME
WASH1
WASH2
WASH3
Automatic startup from the Sleep state
In the Sleep state, the Power Panel Operate/Standby switch (
However, electrical power is supplied only to the necessary components, and the Power
indicator (
To place system in the SLEEP state, use the following:
System p.s.
System
PRIME
WASH1
WASH2
WASH3
Automatic startup with analyzer power kept ON
To keep analyzer power on until the automatic start up, use the following:
System p.s.
System
PRIME
WASH1
WASH2
WASH3
NOTE:
the automatic startup setting time occurs. Otherwise, the automatic startup does not
occur.
In this case, you cannot shut down Windows even if you select
[ADVIA] Startup window. Additionally, the CRT screen saver does not operate.
Quality Control
Power OFF check box is cleared (no check mark).
Select
Select
Do check box is cleared (no check mark).
Do check box is selected (check mark present).
Do check box is cleared (no check mark).
) is off.
2
Power OFF check box is selected (check mark present).
Select
Select
Do check box is cleared (no check mark).
Do check box is selected (check mark present).
Do check box is cleared (no check mark).
Power OFF check box is cleared (no check mark).
Select
Select
Do check box is cleared (no check mark).
Do check box is selected (check mark present).
Do check box is cleared (no check mark).
If System is set to Not do, you must select System end in the System list before
.
Not do
.
None
.
System end
.
None
.
Not do
.
None
) remains set to
1
OPERATE
on the
Shutdown
.
89