Performing A System-Assisted Startup (Start Set) - Siemens ADVIA 2400 Operator's Manual

Figure 2-1. Power panel at Startup
The power indicator (
when the communication to the PC is established.
4. At the Startup window, do the following:
a. In the Please enter password box, enter the user password.
b. Select New Start or Re-start, then select
CAUTION
Make sure that all probes and mixers are free to move without obstruction and that all
analyzer covers are in place to avoid possible injury and damage to the analyzer
5. When the Start and the Ready indicators are off, and the Initialize button on the
Operation Panel activates (turns black), select
6. At the Windows desktop, double-select the rack handler icon.
7. Log on as

Performing a system-assisted startup (Start set)

1. Verify that sufficient system reagents and wash solutions are available for the startup
you want to run.
2. At the Menu Panel, select
3. In the Mode set list, select
66
) is on, and the Start (
2
User passwords assigned in the User Code Settings window are not case
sensitive.
After a few minutes, the Menu Panel and the Operation Panel open.
or
supervisor tech_manager
Maint
Start set
) and Ready (
4
.
OK
.
Initialize
, if required.
. then select
System Startup/Shutdown Settings
.
ADVIA 2400 Operator's Guide
) indicators start flashing
3
.