Sony HVO-1000MD User Manual page 94

• For letter size paper
File format: 24-bit bitmap
File name: watermark_85x11.bmp
Size: 2464 × 3192 pixel
Color:
Background: RGB (255, 255, 255) white
Watermark: RGB (0, 0, 0) black
2
Copy the watermark onto a USB memory device.
Create a folder with the following name in the
uppermost directory of the USB memory device, and
copy the watermark file.
Folder name: Watermark
To prepare a logo file
To print logos, prepare a logo file on the unit and copy it
onto a USB memory device beforehand.
1
Prepare the logo file.
The logo file must meet the following conditions.
• For UP-DR80MD printers
File format: 24-bit bitmap
File name: printlogo_UP-DR80MD.bmp
Size: 94 (height) × 900 (width) pixel
• For UP-D25MD printers
File format: 24-bit bitmap
File name: printlogo_UP-D25MD.bmp
Size: 70 (height) × 320 (width) pixel
2
Copy the logo file onto a USB memory device.
Create a folder with the following name in the
uppermost directory of the USB memory device, and
copy the logo file.
Folder name: PrintLogo
To configure system control settings
When [System Control] is selected, configure the
transmission speed.
1
Use the B and b buttons to select [Advanced], and
press the ENTER button.
[Advanced] appears when [System Control] is
selected.
94
Device Settings
The [System Control Setting] screen appears.
2
Select the transmission speed.
1 Use the V and v buttons to select the [Speed] box,
and press the ENTER button.
The [Speed] screen appears.
2 Select a transmission speed, and press the ENTER
button.
The default setting is [9600 bps].
3
When you finish configuration, use the V , v , B , and b
buttons to select [Apply], and press the ENTER
button.
The configurations are saved, and the [Device] tab
appears again.