Initial User Settings - Sony HVO-1000MD User Manual

1
In the [Streaming] tab, use the V , v , B , and b buttons
to select [Advanced], and press the ENTER button.
The [Advanced] settings screen appears.
2
Configure each setting.
Select an item using the V and v buttons, and press the
ENTER button to display the setting screen for that
item.
[Resolution]
Select the streaming resolution in the setting screen
that appears, and press the ENTER button.
The default setting is [320×192].
[Quality]
Select the streaming quality in the setting screen that
appears, and press the ENTER button.
The default setting is [2Mbps].
Note
[2Mbps], [4Mbps], and [6Mbps] can only be selected
when the streaming resolution is under 1280 × 720.
[Frame Rate]
Select the streaming frame rate in the setting screen
that appears, and press the ENTER button.
The default setting is [15fps] ([12fps] for PAL).
3
When you finish configuration, use the V , v , B , and b
buttons to select [Apply], and press the ENTER
button.
The [Streaming] tab appears again.

Initial User Settings

Configure initial setting values related to recording quality
and storage media.
The settings configured here will be used as the initial
default settings when recording.
1
In the [System Admin Settings] screen, use the V , v ,
B , and b buttons to select [Initial User Settings], and
press the ENTER button.
The [Initial User Settings] screen appears.
2
Use the B and b buttons to select a tab, and configure
settings as necessary.
For details on each tab, see the following.
"[Quality] Tab" (page 106)
"[Save] Tab" (page 107)
3
When you finish configuration, use the V , v , B , and b
buttons to select [Apply], and press the ENTER
button.
The configurations are saved, and the [System Admin
Settings] screen appears again.
105
Initial User Settings