Sony HVO-1000MD User Manual page 93

[Print]
Select whether to enable [High Speed Print].
When [Yes] is selected, the print speed is increased but
quality is reduced.
Select [Yes] or [No] in the setting screen that appears,
and press the ENTER button.
The default setting is [No].
Note
The [High Speed Print] setting is only available for
Sony UP-D25MD printers.
[Import Watermark]
Import a watermark file.
Copy the watermark file onto a USB memory device,
and insert the device into a USB port on the unit.
For details on preparing a watermark file, see "To
prepare a watermark file" (page 93).
When you select [Import Watermark] and press the
ENTER button, the following message appears. Select
[OK] and press the ENTER button.
When import of the watermark file is complete, a
notification message will appear.
Note
The [Import Watermark] setting is only available
when using a Sony UP-DR80MD printer.
[Import Logo]
Import a logo file.
Copy the logo file onto a USB memory device, and
insert the device into a USB port on the unit.
For details on preparing a logo file, see "To prepare
a logo file" (page 94).
When you select [Import Logo] and press the ENTER
button, the following message appears. Select [OK]
and press the ENTER button.
When import of the logo file is complete, a notification
message will appear.
Note
The [Import Logo] setting is only available when
using a Sony USB printer.
3
When you finish configuration, use the V , v , B , and b
buttons to select [Apply], and press the ENTER
button.
The configurations are saved, and the [Device] tab
appears again.
To prepare a watermark file
To print watermarks, prepare a watermark file that can be
imported to the unit and copy it onto a USB memory
device beforehand.
1
Prepare the watermark file.
The watermark file must meet the following
conditions.
• For A4 size paper
File format: 24-bit bitmap
File name: watermark_A4.bmp
Size: 2392 × 3400 pixel
Color:
Background: RGB (255, 255, 255) white
Watermark: RGB (0, 0, 0) black
93
Device Settings