Keyboard Mode - Sony HVO-1000MD User Manual

[Keyboard Mode]

Select whether to use the soft keyboard (i.e., on-screen
keyboard) or a hard keyboard in the setting screen that
appears, and press the ENTER button.
The default setting is [Soft Keyboard].
Note
If [USB 3] or [USB 4] is set to touch panel / mouse
mode, hard keyboard mode cannot be selected.
3
To configure settings in other tabs, use the V , v , B ,
and b buttons to select a tab.
If you are finished configuring [Function Settings],
use the V , v , B , and b buttons to select [Apply], and
press the ENTER button to save the configurations.
To configure reader settings
When a barcode reader or card reader is selected, configure
the settings for reading data. The procedure for
configuring barcode reader and card reader settings is the
same.
1
Use the B and b buttons to select [Advanced], and
press the ENTER button.
[Advanced] appears when a barcode reader or card
reader is selected.
The [Reader Settings] screen appears.
2
Scan the card.
The data from the card appears in the [Read Data] area.
Proceed with configurations while confirming this
data.
Note
If there is an empty field within the data, an asterisk (*)
appears on the display.
3
Configure each setting.
Select an item using the V and v buttons, and press the
ENTER button to display the setting screen for that
item.
For details on using the on-screen keyboard, see
"Using the On-Screen Keyboard" (page 35).
4
When you finish configuration, use the V , v , B , and b
buttons to select [Decode], and press the ENTER
button.
The decoding results are displayed.
91
Device Settings