Sony HVO-1000MD User Manual page 33

1
Use the B and b buttons to select the [Print] tab.
The name of the printer selected for use appears in the
[Printer] box.
2
Configure each setting.
Select an item using the V , B , b , and v buttons, and
press the ENTER button to display the setting screen
for that item.
[Layout]
Select the number of still images to print on each sheet.
You can select from 1 image (1 × 1), 2 images (1 × 2),
4 images (2 × 2), 6 images (2 × 3), 8 images (2 × 4),
9 images (3 × 3), 12 images (3 × 4), 15 images (3 × 5),
or 18 images (3 × 6).
The default setting is [6 images (2 × 3)].
Note
The layout options that are available and the initial
default setting will vary depending on your printer.
The maximum setting for the UP-D25MD printer is
two images. However, if [UPC-21S/24SA] is selected
for [Paper], the maximum setting will be one image.
For details on a video printer, refer to the operating
instructions for that printer.
[Auto Print]
When you capture a still image while this is set to
[Yes] and you are using USB printer, the still image is
automatically printed.
[Paper]
Specify the printer's paper size.
[Orientation]
Specify the orientation for printing.
The default setting is [Portrait].
This setting is disabled for UP-D25MD printers.
[Copies]
Specify the number of copies to print.
The default setting is [1].
[Add. Info.]
Select whether to print the following additional
information (recording date, patient information, etc.).
You can also individually select whether to print each
additional information item in the [Detail of Add.
Info.] screen.
The default setting is [Not Printed] for all settings
except [Rec Timestamp].
Note
To print watermarks or logos, you must import the
watermarks files and logo files onto the unit
beforehand.
The items that can be configured in the [Detail of Add.
Info.] screen are as follows.
[Logo]
Select whether to print logos when using a Sony USB
printer.
[Recording Date]
Select whether to print the date on which the image
was recorded.
[Patient Info.]
Select whether to print patient information.
[Doctor]
Select whether to print the name of the doctor. This
setting is disabled for UP-D25MD printers.
[Case]
Select whether to print the name of the procedure. This
setting is disabled for UP-D25MD printers.
[Facility Name]
Select whether to print the name of the facility. This
setting is disabled for UP-D25MD printers.
[Rec Timestamp]
Select whether to print the time at which the image was
recorded.
[Watermark]
Select whether to print watermarks when using a Sony
UP-DR80MD USB printer.
Notes
• To print watermarks, you must import a watermark
file that is created in the proper format beforehand.
You can import the watermark file from the [System
Admin Settings] screen - [Device Settings] screen -
[Device] tab.
• To print logos, you must import a logo file that is
created in the proper format beforehand. You can
import the logo file from the [System Admin
Settings] screen - [Device Settings] screen -
[Device] tab.
Configuring Recording Settings (User Settings)
33