Selecting Image Inputs - Sony HVO-1000MD User Manual

The [User Settings] screen appears.
4
Use the B and b buttons to select a tab, and press the
ENTER button.
5
Configure the settings in each tab as necessary.
6
When you finish configuration, use the V , v , B , and b
buttons to select [Apply], and press the ENTER
button.
The [Settings] screen appears again.

Selecting Image Inputs

1
Use the B and b buttons to select the [Select Input] tab.
2
Use the v button to select the [Input] box, and press
the ENTER button.
The [Input] screen appears.
28
Configuring Recording Settings (User Settings)
3
Use the V and v buttons to select an input signal
format, and press the ENTER button.
Note
When the HVO-3000MT is in 3D mode, [VIDEO] and
[S-VIDEO] cannot be selected.
Example: Screen during 3D mode
The [Select Input] tab appears again.
4
To configure image quality settings, proceed to
"Configuring Image Quality Settings" (page 29).
If you are finished configuring, use the V , v , B , and b
buttons to select [Apply], and press the ENTER
button.