[Video 2] Tab - Sony HVO-1000MD User Manual

To configure multi auto live settings
Configure duration and position settings for the captured
images that are displayed when using the multi auto live
function.
1
Use the B and b buttons to select [Advanced], and
press the ENTER button.
2
Configure each setting.
Select an item using the V and v buttons, and press the
ENTER button to display the setting screen for that
item.
[Duration]
Select the duration for which captured still images are
displayed.
The default setting is [3 sec].
[Position]
Select the position in which captured still images are
displayed.
The default setting is [Left].
The four most recent still images are displayed when
[Top] or [Bottom] is selected, and the three most
recent still images are displayed when [Left] or [Right]
is selected.
[Monitor]
Select the monitor mode.
The default setting is [Normal].
Note
If the connected monitor is in full mode, the left and
right edges of the still images displayed for the auto
live function may be cropped. In such cases, set
[Monitor] to [Normal].
3
When you finish configuration, use the V , v , B , and b
buttons to select [Apply], and press the ENTER
button.
The [Video 1] tab appears again.

[Video 2] Tab

Configure recording settings.
1
Use the B and b buttons to select the [Video 2] tab.
2
Configure each setting.
Select an item using the V and v buttons, and press the
ENTER button to display the setting screen for that
item.
[Down Convert Mode]
Specify whether to retain the aspect ratio when
upconverting or downconverting.
When you want to retain the aspect ratio when
downconverting HD inputs into SD outputs or
upconverting SD inputs into HD outputs, select
[Letterbox] for [Down Convert Mode].
The default setting is [Normal].
Note
When the HVO-3000MT is set to 3D mode, the [Down
Convert Mode] setting is disabled.
[Input Detect Duration]
Select from 0 to 3 seconds for the duration for which
input signals are detected.
The default setting is [3 sec].
85
Function Settings