Sony HVO-1000MD User Manual page 144

Input connectors
S-VIDEO IN (Mini DIN 4-pin type) (1)
Y: 1.0 Vp-p (75 Ω) Sync negative
C (BURST): 0.286 Vp-p (75 Ω) (NTSC)
C (BURST): 0.3 Vp-p (75 Ω) (PAL)
VIDEO IN (BNC type) (1)
Composite
1.0 Vp-p (75 Ω)
Sync negative
DVI-D IN (DVI 19-pin) (1)
TMDS 1 channel (single link)
RGB IN (Mini D-sub 15-pin) (1)
0.7 Vp-p/with sync on green G: 1.0 Vp-p
75 Ω
HD-SDI IN (BNC type) (1)
SD: SMPTE259M compliant
HD: SMPTE292M compliant 75 Ω
AUDIO IN (Stereo mini jack) (1)
1.4 Vrms (full bit), input impedance
10 kΩ or higher, unbalanced
Output connectors
S-VIDEO OUT (Mini DIN 4-pin type) (1)
Y: 1.0 Vp-p (75 Ω) Sync negative
C (BURST): 0.286 Vp-p (75 Ω) (NTSC)
C (BURST): 0.3 Vp-p (75 Ω) (PAL)
VIDEO OUT (BNC type) (1)
Composite
1.0 Vp-p (75 Ω)
Sync negative
DVI-D OUT (DVI 19-pin) (1)
TMDS 1 channel (single link)
HD-SDI OUT (BNC type) (1)
SD/HD 0.8 Vp-p 75 Ω
AUDIO OUT (Stereo mini jack) (1)
1.4 Vrms (full bit), load impedance
10 kΩ, unbalanced
Other Interfaces
USB (4) USB 2.0
Network (RJ-45 type) (1)
1000 Base-T/100 Base-TX
REMOTE RS-232C (D-sub 9-pin) (2)
REMOTE contact switch (Stereo mini jack) (4)
REMOTE MONITOR (RJ-45 type) (1)
MENU MONITOR (Mini D-sub 15-pin) (1)
Equipotential connector
Accessories supplied
Before Using this Unit (1)
CD-ROM (User's Guide, PROTOCOL MANUAL) (1)
Warranty booklet (1)
Infrared remote control unit (1)
144
Specifications
Optional accessories
Foot switch Device conforming to IPX1 standard
Design and specifications are subject to change without
notice.
Medical Specifications
Protection against electric shock:
Class I
Protection against harmful ingress of
water:
Ordinary
Degree of safety in the presence of a
flammable anesthetic mixture with air
or with oxygen or nitrous oxide:
Not suitable for use in the presence of
a flammable anesthetic mixture with
air or with oxygen or nitrous oxide
Mode of operation:
Continuous
HVO-3000MT
General
Power requirements
100 V to 240 V AC, 50/60 Hz
Input current 1.9 to 0.8 A
Operating temperature
5 °C to 40 °C (41 °F to 104 °F)
Operating humidity
20% to 80% (Maximum wet-bulb
temperature: 30 °C (86 °F))
(no condensation)
Operating pressure
700 hpa to 1,040 hpa
Storage and transport temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Storage and transport humidity
20% to 90% (Maximum wet-bulb
temperature: 30 °C (86 °F))
(no condensation allowed)
Storage and transport pressure:
700 hPa to 1,040 hPa
Mass Approx. 8.4 kg (18.5 lb.)