Table of Contents
Advertisement
On the wired side of the network, the access point floods all the wired interfaces. This feature reduces unnecessary flooding
of multicast traffic in the network
To view a network's IGMP configuration:
1. Select the
Statistics
menu from the Web UI.
2. Select
System
from the navigation pane (on the left-hand side of the screen). Expand a RF Domain and select one of its
connected access points.
3. Select
Network
and expand the menu to reveal its sub menu
4. Select IGMP.
The
Group
field displays the following:
VLAN
Group Address
Port Members
Version
The
Multicast Router (MRouter)
VLAN
Learn Mode
Port Members
Figure 13-67 Access Point - Network IGMP screen
Displays the group VLAN where the multicast transmission is conducted.
Displays the Multicast Group ID supporting the statistics displayed. This group ID is the
multicast address that hosts are listening to.
Displays the ports on which multicast clients have been discovered by the access point. For
example, ge1, radio1, etc.
Displays each listed group IGMP version compatibility as either version 1, 2 or 3.
field displays the following:
Displays the group VLAN where the multicast transmission is conducted.
Displays the learning mode used by the router as either Static or PIM-DVMRP.
Displays the ports on which multicast clients have been discovered by the multicast router. For
example, ge1, radio1, etc.
items.
Statistics 13 - 105
Hide quick links:
Advertisement
Table of Contents
