Table of Contents
Advertisement
5 - 68 WiNG 5.5 Access Point System Reference Guide
Local Session ID
MTU
Name
Remote Session ID
19. Select
Add
to create a new manual session,
selected manual session.
20. Set the following session parameters:
Name
Displays the numeric identifier assigned to each listed tunnel session. This is the
pseudowire ID for the session. This pseudowire ID is sent in a session establishment
message to the L2TP peer.
Displays each sessions's maximum transmission unit (MTU). The MTU is the size (in bytes)
of the largest protocol data unit the layer can pass between tunnel peers in this session.
A larger MTU means processing fewer packets for the same amount of data.
Lists the name assigned to each listed manual session.
Lists the remote session ID passed in the establishment of the tunnel session.
Edit
to modify an existing session configuration or
Figure 5-37 Network - L2TPv3 screen, Add T2TP Peer Configuration
Define a 31 character maximum name for this tunnel session. Each session name
represents a single data stream.
Delete
to remove a
Hide quick links:
Advertisement
Table of Contents
