Table of Contents
Advertisement
19. Define or override the following
MLCP IP
MLCP VLAN
Tunnel MiNT across
extended VLAN
20. Select the
Tunnel Controller Load Balancing (Level1)
21. Define the group name of clustered tunnel controllers in the
22. Select
OK
to save the changes and overrides made to the Settings tab. Select
configuration.
23. Select the
IP
tab to display the link IP network address information shared by the devices managed by the MINT
configuration.
Figure 5-214 Device Overrides - Advanced Profile MINT screen - IP tab
The IP tab displays the IP address, Routing Level, Listening Link, Port, Forced Link, Link Cost, Hello Packet Interval and
Adjacency Hold Time managed devices use to securely communicate amongst one another.
24. Select
Add
to create a new Link IP configuration or
MINT Link
Settings:
Select this option to enable MINT Link Creation Protocol (MLCP) by IP Address. MINT
Link Creation Protocol is used to create one UDP/IP link from the device to a neighbor.
That neighboring device can be another AP.
Select this option to enable MLCP by VLAN. MLCP is used to create one VLAN link
from the device to a neighbor. That neighboring device can be another AP.
Select this option to enable tunneling MiNT protocol packets across extended VLANs.
option to enable load balancing on the tunnel controller.
Edit
to override an existing MINT configuration.
Device Configuration 5 - 333
Preferred Tunnel Controller Name
Reset
to revert to the last saved
field.
Hide quick links:
Advertisement
Table of Contents
