Table of Contents
Advertisement
VLAN
IP Address
Once the configurations of existing Virtual Interfaces have been reviewed, determine whether a new interface requires
creation, or an existing Virtual Interface requires edit or deletion.
6. Select
Add
to define a new Virtual Interface configuration,
or
Delete
to permanently remove a selected Virtual Interface.
The Basic Configuration screen displays by default regardless of a whether a new Virtual Interface is being created or an
existing one is being modified.
7. If creating a new Virtual Interface, use the
8. Define the following parameters from within the
Description
Admin Status
Displays the numerical VLAN ID associated with each listed interface.
Defines whether DHCP was used to obtain the primary IP address used by the Virtual
Interface configuration.
Figure 5-17 Virtual Interfaces - Basic Configuration tab
Name
spinner control to define a numeric ID from 1 - 4094.
Properties
Provide or edit a description (up to 64 characters) for the Virtual Interface that helps
differentiate it from others with similar configurations.
Either select the Disabled or Enabled radio button to define this interface's current status
within the network. When set to Enabled, the Virtual Interface is operational and
available. The default value is Disabled.
Edit
to modify the configuration of an existing Virtual Interface
field:
Device Configuration 5 - 31
Hide quick links:
Advertisement
Table of Contents
