Table of Contents
Advertisement
administration. A Virtual Interface is also used to map VLANs to IP address ranges. This mapping determines the destination
networks for routing.
To review existing Virtual Interface configurations and either create a new Virtual Interface configuration, modify (override) an
existing configuration or delete an existing configuration:
1. Select the
Configuration
2. Select
Devices
from the
3. Select
Device Overrides
4. Select a target device from the device browser in the lower, left-hand, side of the UI.
5. Select
Interface
to expand its sub menu options.
6. Select
Virtual
Interfaces.
NOTE: A blue override icon (to the left of a parameter) defines the parameter as having
an override applied. To remove a device's override, go to the Basic Configuration screen's
Device Overrides
7. Review the following parameters unique to each Virtual Interface configuration to determine whether a parameter override
is warranted:
Name
Type
Description
tab from the Web UI.
Configuration
tab.
field and select
Clear
Figure 5-131 Device Overrides - Virtual Interfaces screen
Displays the name of each listed Virtual Interface assigned when it was created. The
name is from 1 - 4094, and cannot be modified as part of a Virtual Interface edit.
Displays the type of Virtual Interface for each listed interface.
Displays the description defined for the Virtual Interface when it was either initially
created or edited.
Overrides.
Device Configuration 5 - 211
Hide quick links:
Advertisement
Table of Contents
