Motorola WiNG 5.5 Reference Manual page 239

Monitor Primary Port
Link
Path Method
6. Select the Add button to create a new Mesh Connex policy.
Figure 5-97 Mesh Point Configuration - Add Mesh Point Mesh Connex Policy screen
7. Refer to the following for more information on the Mesh Point Mesh Connex Policy screen:
MeshConnex Policy
Is Root
Root Selection Method
Set as Cost Root
Displays if this mesh point monitors link status on the primary port.
Displays the path selection method used to select the path to the root node.
Provide a name for the Mesh Connex Policy. Use the Create icon to create a new Mesh
Connex Policy. To edit an existing policy, select it from the drop-down and click the Edit
icon. For more information on creating or editing a Mesh Connex policy, see
Policy on page 6-87
From the drop-down menu, select the root behavior of this access point. Select True to
indicate this access point is a root node for this mesh network. Select False to indicate
this access point is not a root node for this mesh network.
Use the drop-down menu to determine whether this mesh point is the root or non-root
mesh point. Select either None (the default setting) or auto-mint.
Select this option to set the mesh point as the cost root for mesh point root selection.
This setting is disabled by default.
Device Configuration 5 - 153
MeshConnex