Motorola WiNG 5.5 Reference Manual page 659

5. If adding a new administrator, enter the name in the
characters. Optimally assign a name representative of the user's intended access type and role.
6. Provide a strong administrator password. Once provided,
mandatory field.
7. Define protocol Access
simultaneously.
Web UI
Telnet
SSH
Console
8. Select an Administrator
Superuser
System
Network
Figure 10-2 Administrators screen
User Name
for the user's unique permissions. If required, all four options can be selected and invoked
Select this option to enable access to the access point's Web UI.
Select this option to enable access to the access point using TELNET.
Select this option to enable access to the access point using SSH.
Select this option to enable access to the access point's console.
Role. Only one role can be assigned.
Select this option to assign complete administrative rights to this user. This entails all
the roles listed.
Select this option to allow the administrator to configure general settings like NTP,
boot parameters, licenses, perform image upgrade, auto install, manager redundancy/
clustering and control access.
Select this option to allow the user to configure all wired and wireless parameters (IP
configuration, VLANs, L2/L3 security, WLANs, radios etc).
field. This is a mandatory field, and cannot exceed 32
Reconfirm the password to ensure its accuracy. This is also a
Management Access 10 - 3