Motorola WiNG 5.5 Reference Manual page 514

6 - 88 WiNG 5.5 Access Point System Reference Guide
Mesh ID
Mesh Point Status
Descriptions
Control VLAN
Allowed VLANs
Security Mode
Mesh QoS Policy
5. Select Add to create a new MeshConnex policy,
obsolete policies from the list of those available. Use
Use Rename
The Configuration
6. Refer to the Basic Configuration
Mesh Point Name
Mesh ID
Displays the IDs of all mesh identifiers for the configured mesh points.
Specifies the status of each configured mesh point, either Enabled or Disabled.
Displays any descriptive text entered for each of the configured mesh points.
Displays VLAN number for the control VLAN on each of the configured mesh points.
Displays the list of VLANs allowed on each of the configured mesh points.
Displays the security for each of the configured mesh points. The field will display none
for no security or psk for pre-shared key authentication.
Displays the list of Mesh Quality of Service policies associated with each of the
configured mesh points.
to rename an existing MeshConnex policy.
screen displays by default for the new or modified MeshConnex policy.
Figure 6-39 MeshConnex - Basic Configuration screen
section to define a MeshConnex profile.
Specify a name for the new mesh point. The name should be descriptive of the mesh point
to easily differentiate it from other mesh points. This field is mandatory.
Specify a mesh identifier for this mesh point. This field is optional.
Edit to modify the attributes of a existing policy or
Copy to create a copy of an existing policy for further modification.
Delete to remove