Motorola WiNG 5.5 Reference Manual page 549

Attributes
Server Pooling Mode
Client Attempts
Request Timeout
ID Request Timeout
Retransmission Scale
Factor
Cisco VSA Audit Session
Id
16. Select OK to save the updates. Select
Lists whether the format specified applies only to the user name/password in mac-auth
or for all attributes that include a MAC address, such as calling-station-id or called-
station-id.
Controls how requests are transmitted across RADIUS servers. Failover implies traversing
the list of servers if any server is unresponsive. Load Balanced uses all servers in a round-
robin fashion. The default setting is Failover.
Defines the number of times (1 - 10) an EAP request is transmitted to a wireless client
before giving up. The default setting is 3.
Defines the time after which an EAP Request to a wireless client is retried.
Defines the time (1 - 60 seconds) after which an EAP ID Request to a wireless client is
retried. The default setting is 30 seconds.
Configures the scaling of the retransmission attempts. Timeout at each attempt is a
function of the request timeout factor and client attempts number. 100 (default setting)
implies a constant timeout at each retry; smaller values indicate more aggressive (shorter)
timeouts, larger numbers indicate more conservative (longer) timeouts on each successive
attempt.
Configures a vendor specific attribute (VSA) for CISCO to allow CISCO's Identity Services
Engine (ISE) to validate the compliance of a client to the network's policies such as the
validity of the virus definition files for the antivirus software or the definition files for a
anti-spy ware software.
Reset to revert to last saved configuration.
Network configuration 7 - 21