Table of Contents
Advertisement
7 - 30 WiNG 5.5 Access Point System Reference Guide
NOTE: Only 2 AAA TACACS authorization servers can be configured at a time.
19. Define the following to add or modify AAA TACACS authorization server configuration:
Server Id
Host
Port
Secret
Request Attempts
Request Timeout
Retry Timeout Factor
20. Click
OK
to close the Authorization Server dialog and save the changes. Click
configuration. Click
21. Click the
Settings
Figure 7-20 AAA TACACS Policy - New Authorization Server
Displays the numerical server index (1-2) for the authorization server when added to the
list available to the access point.
Specify the IP address or hostname of the AAA TACACS authorization server.
Define or edit the port on which the AAA TACACS server listens to traffic within the
access point managed network. The port range is 1 - 65,535. The default port is 49.
Specify the secret (password) used for authentication on the selected AAA TACACS
server. By default the secret is displayed as asterisks.
When a secret is entered, it must be confirmed in the Reconfirm text box.
Displays the number of attempts a client can retransmit a missed frame to the AAA
TACACS server before it times out of the authentication session. The available range is
from 1 - 10. The default is 3.
Specify the time for the access point's re-transmission of request packets. The default is
3 seconds. If this time is exceeded, the authentication session is terminated.
Specifies the interval, in seconds, between two successive re-transmission attempts of
request packets. Specify a value from 50 - 200 seconds. The default is 100 seconds.
Exit
to close the Authorization Server dialog.
tab.
Reset
to revert to the last saved
Hide quick links:
Advertisement
Table of Contents
