Motorola WiNG 5.5 Reference Manual page 104

5 - 18 WiNG 5.5 Access Point System Reference Guide
5. Define the Preferred Group
cannot exceed 64 characters.
6. Select the VLAN
4,095 are reserved and cannot be used. This setting is disabled by default.
7. Define the Hello Interval
The Hello interval is the interval between two consecutive hello keep alive messages exchanged between the access point
and the adopting wireless controller. These messages serve as a connection validation mechanism to ensure the
availability of the adopting wireless controller. Use the spinner to set a value from 1 - 120 seconds.
8. Define the Adjacency Hold Time
down and unavailable to provide services. Use the spinner to set a value from 2 - 600 seconds.
9. Enter Controller Hostnames
following parameters to define
Host
Pool
Figure 5-10 Profile Adoption screen
used as optimal group of Virtual Controller for adoption. The name of the preferred group
option to define a VLAN the access point's associating Virtual Controller AP is reachable on. VLANs 0 and
value in seconds.
value. This value sets the time after which the preferred controller group is considered
as needed to define resources for adoption. Click
Controller Hostnames:
Use the drop-down menu to specify whether the controller adoption resource is defined
as a (non DNS) IP address or a hostname. Once defined, provide the numerical IP or
hostname. A hostname cannot exceed 64 characters.
Use the spinner controller to set a pool of either 1 or 2. This is the pool the target Virtual
Controller belongs to. The default setting is 1.
+Add Row to add controllers. Set the