Basic Operation; Common Mode Display Features; Selecting Modes & Functions - Yamaha A4000 Owner's Manual

3. Basic Operation

Common Mode Display Features

The following display features are provided in all A5000/A4000 mode displays (but not in the COMMAND
displays).
w
e
r
q The currently selected mode and display page.
w Indicates that Knob 1 can be used to position the cursor and switch display pages.
e The number and name of the currently selected program. This only difference is in the PLAY
mode PROGRAM function page, in which the selected program is highlighted in the PRO-
GRAM list.
r The currently selected sample or sample bank name. This is not shown in the PLAY mode.
• The following icons may appear to the left of the sample name:
• "
• "
• The following icon may appear to the right of the sample name:
• "
t "
" will appear when the sample solo function (page 93) is turned on.
y When the tree view display MIDI Sample function (page 84) is set to either Upper or Lower,
the " " or "
u The currently selected part number is displayed here when the Multi program mode is selected.
" " will also appear when the currently selected part is set to receive on the Basic Receive Chan-
nel (i.e. it is the Master program).
Selecting Modes & Functions
When selecting a function on the A5000/A4000, first press the mode button containing the function you
want to access (PLAY, EDIT, REC, DISK, or UTILITY), and then press the appropriate function button
([F1] — [F6]).
To access the EDIT mode FILTER functions, for example, first press the [EDIT] mode button and then the
[F3] function button (FILTER).
q t y u
"............ Sample bank.
" ........... Stereo sample.
"............ The sample has been edited but not saved to disk.
" icon will appear, respectively.
Chapter 3 The A5000/A4000 System & Features
A5000/A4000 •

3. Basic Operation

77