Yamaha A4000 Owner's Manual page 139

Knob 1
[ Turn] Cursor Position/Page Selection
Positions the cursor and selects display pages.
[ Press] Tree View
Calls the Tree View display (page 83).
Knob 3
[ Turn] FEG Attack Rate
This value sets the rate at which the cutoff frequency
moves from its FEG initial level (at Note On) to the attack
level. Higher values produce faster rates.
[Range] 0 — 127
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 4
[ Turn] FEG Decay Rate
This value sets the rate at which the cutoff frequency
moves from the FEG attack level to the sustain level.
Higher values produce faster rates.
[Range] 0 — 127
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 5
[ Turn] FEG Release Rate
This value sets the rate at which the cutoff frequency
moves from the FEG sustain level to the FEG release
level following Note Off. Higher values produce faster
rates.
[Range] 0 — 127
• Note that the effectiveness of this setting declines at
higher AEG release rates (page 137), since the
sound dies out before the shift in cutoff frequency
can be heard.
[ Press] QUICK...
Calls the quick entry menu (page 83).
w
Cursor (Filter EG Level)
Cursor
w
Knob 1 Knob 2
Turn
Cursor/Page FEG Init Level
action
Press
Tree View QUICK...
action
• It is not possible to set the actual cutoff frequency beyond a certain
range. Regardless of settings you make at this page, the cutoff fre-
quency will not shift beyond these limits.
Knob 3 Knob 4 Knob 5
FEG Attack FEG Sustain FEG Release
Level Level Level
QUICK... QUICK... QUICK...
Knob 1
Same function as Cursor
Knob 2
[ Turn] FEG Init Level
This value sets the initial level (the cutoff-frequency offset
applied at time of Note On).
[Range] -127 — +127
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 3
[ Turn] FEG Attack Level
This value sets the attack level. (See illustration, page
138)
[Range] -127 — +127
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 4
[ Turn] FEG Sustain Level
This value sets the sustain level. (See illustration, page
138)
[Range] -127 — +127
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 5
[ Turn] FEG Release Level
This value sets the release level. (See illustration, page
138)
[Range] -127 — +127
[ Press] QUICK...
Calls the quick entry menu (page 83).
e
Cursor (Filter EG Mode)
Cursor
e
Knob 1 Knob 2
Turn FEG Rate
Cursor/Page
action Scaling
Press
Tree View QUICK...
action
Knob 1
Same function as Cursor
A5000/A4000 •
EDIT-EG
q
(page 138).
Knob 3 Knob 4 Knob 5
FEG Rate FEG Attack FEG Level
Velocity Level Velocity Velocity
Sensitivity Sensitivity Sensitivity
QUICK... QUICK... QUICK...
q
(page 138).
139
Chapter 5 EDIT Mode