Effect Parameter List - Yamaha A4000 Owner's Manual

Effect Parameter List

Effect Parameter List
This section explains the meaning of each parameter in each effect.
The tables give the parameter number, the range of settings (or selections), and the explanation.
("@" marked parameters have no effect even if a program controller is assigned to the function)
1: DIGITAL SCRATCH
1 Input Level 0 — 127
2 Initial Delay 0.1 — 460.0ms
3 Scratch Speed 1 — 127
4 Scratch Depth 0 — 127
5 Auto Pan Speed 0.00Hz — 39.7Hz
6 Auto Pan Depth 0 — 127
7 EQ Frequency 100Hz — 10.0kHz
8 EQ Gain -12 — +12dB
9 EQ Width 1.0 — 12.0
10 HPF Frequency thru, 20Hz — 8.0kHz
11 Dry/Wet Balance D63>W — D=W — D<W63
2: AUTO SYNTH
1 Mod Speed 0 — 127
2 Mod Wave Type TypeA,TypeB,TypeC,TypeD
3 Mod Depth 0 — 127
4 Mod Depth Ofst R -64 — +63
5 LPF Frequency 1.0kHz — 18.0kHz,thru
6 HPF Frequency thru,22Hz — 8.0kHz
7 Dry Mix Level 0 — 127
8 Delay Time 0.1 — 370.0ms
9 Delay Time Ofst R 0 — -884
10 Feedback Level -63 — +63
11 FB Level Ofst R -63 — +63
12 Delay Level 0 — 127
13 AM Speed 0 — 127
14 AM Wave tri,sine,saw up,saw down
15 AM Depth 0 — 127
16 AM Inverse R normal,inverse
3: TECH MODULATION
1 Mod Speed 0 — 127
2 Mod Depth 0 — 127
3 Pre Mod HPF Freq thru, 20Hz — 8.0kHz
4 Mod Gain -12 — +12dB
5 Mod LPF Frequency 1.0kHz — 18.0kHz, thru
6 Mod LPF Resonance 1.0 — 12.0
7 Mod Mix Balance D63>W — D=W — D<W63
8 Delay Time 0.1 — 740.0ms
9 Delay Time Ofst R 0 — -884
10 Feedback Level -64 — +63
11 FB Level Ofst R -64 — +63
12 Feedback High Damp 0.1 — 1.0
13 FB Hi Damp Ofst R -0.9 — +0.9
14 Dry/Wet Balance D63>W — D=W — D<W63
4: NOISY MOD DELAY
1 Dry/Wet Balance D63>W — D=W — D<W63
2 Mod Speed 0 — 127
3 Mod Wave Type Type-A, Type-B, Type-C, Type-D
4 Mod Depth 0 — 127
5 Delay Time 0.1ms — 650.0ms
6 Feedback Level -63 — +63
7 Mod Mix Balance 1 — 127
8 EQ High Gain -12dB — +12dB
9 HPF Frequency thru, 20Hz — 8.0kHz
5: NOISE AMBIENT
1 Dry/Wet Balance D63>W — D=W — D<W63
2 Mod Speed 0 — 127
3 Mod Depth 0 — 127
4 Noise Level 0 — 127
5 LPF Frequency 1.0kHz — 18.0kHz,thru
6 Dry Mix Level 0 — 127
7 Delay Time 0.1 — 370.0ms
8 Delay Time Ofst R 0 — -884
9 Feedback Level -63 — +63
10 Dry Level 0 — 127
11 AM Speed 0.0Hz — 39.70Hz
12 AM Wave tri,sine,saw up,saw down
13 AM Depth 0 — 127
14 AM Inverse R normal,inverse
258
Appendix
• A5000/A4000
Scratch depth
Delay time
Scratch modulation frequency
Scratch modulation depth
Autopan frequency
Autopan depth
Frequency at which the EQ will boost/cut the mid range
Gain by which the EQ will boost/cut the mid range
Width of the mid range area boosted/cut by the EQ
Frequency at which the high pass filter will cut the low range
Balance between dry sound and effect sound
Modulation speed
Modulation type
Modulation depth
R ch offset relative to modulation depth
Frequency at which the low pass filter will cut the high range
Frequency at which the high pass filter will cut the low range
Add dry sound before the delay input
Delay time
Delay time offset for the R ch offset
Feedback amount
Feedback offset for the R ch
Delay level
Modulation frequency
Select modulation waveform
Amplitude modulation depth
Left/right phase reversal of the amplitude modulation signal
Modulation speed
Modulation depth
Frequency at which the high pass filter will cut the low range
Gain of the modulation signal
Frequency at which the low pass filter will cut the high range
Resonance of the low pass filter
Balance between the effect sound and the dry sound before the delay input
Delay time
Delay time offset for the R ch
Feedback amount
Feedback offset for the R ch
Adjust the high range attenuation (lower values will cause the high range to decay faster)
High Damp offset for the R ch
Balance between the dry sound and effect sound
Balance between the dry sound and the effect sound
Delay modulation frequency
Modulation type
Modulation depth
Delay time
Feedback amount
Balance between delay sound and delay bypass sound
Gain by which the EQ will boost/cut the high range
Frequency at which the high pass filter will cut the low range
Balance between dry sound and effect sound
Modulation speed
Modulation depth
Level of noise component
Frequency at which the low pass filter will cut the high range
Pre-delay dry level
Delay time
Delay time offset for the R ch
Feedback amount
Delay level
Modulation frequency
Modulation waveform selection
Depth of amplitude modulation
Invert left/right phase of amplitude modulation signal