Rear Panel - Yamaha A4000 Owner's Manual

Panel and Connector Arrangement

Rear Panel

q AC inlet
Connects to the AC power cord supplied with the A5000/A4000.
(Please do not use any other power cord with this unit.)
w MIDI IN-A, IN-B, OUT, THRU-A, THRU-B
(MIDI IN, OUT, THRU on the A4000)
These connectors are for connection to external MIDI devices.
The MIDI IN-A and MIDI IN-B connectors (MIDI IN only on
the A4000) are for reception of MIDI messages, while the MIDI
OUT connector is for MIDI transmission. MIDI THRU-A and
THRU-B (MIDI THRU only on the A4000) retransmits the data
received at the MIDI IN connector(s).
e ASSIGNABLE OUT jacks
Analog output jacks. These jacks operate independently of the
STEREO OUT jacks. You can use these jacks to output the
sound of one or more selected samples, or to output the signal
supplied through the front panel's analog input connectors (page
97, 128). You may also set them so that they output the same sig-
nal as the STEREO OUT jacks (page 125).
12
A5000/A4000
q
t w
r STEREO OUT jacks
These are the main analog output jacks.
t SCSI connector
This is a half-pitch 50-pin connector. You use it to connect up a
SCSI hard drive, CD-ROM drive, or other SCSI device.
e r
A5000