Customise - Yamaha A4000 Owner's Manual

UTILITY-SYSTEM
Knob 5
[ Turn] AUDITION Key Trigger Mode
Selects whether the [AUDITION] button produces sound
only while held down, or whether it continues to produce
sound until pressed a second time.
[Range] normal, toggle
• normal ... The button produces sound only while
you hold it down. Sound stops immediately
when you release the key.
• toggle ... Pressing the button once starts the play-
back. Pressing the key again stops the sound
(if it is still playing) and disengages the key.

Customise

[UTILITY] Button [F5] Button
"UTIL-Custom"
Specifies how pitches will be displayed, which page will be
displayed first when switching between modes and functions,
and more.
Cursor q
Cursor
q
Knob 1 Knob 2
Turn
Cursor/Page —
action
Press
Tree View —
action
Knob 1
[ Turn] Cursor/Page
Positions the cursor and selects display pages.
[ Press] Tree View
Calls the Tree View display (page 83).
Knob 3
[ Turn] Note Display Type
This value selects the note display type.
[Range] Name, Number
• Name ... The A5000/A4000 displays note values by
name. For example: C3, F4, F#-1
• Number ... The A5000/A4000 displays note values
by MIDI note number. For example: 60, 77, 18.
198
Chapter 8 UTILITY Mode
Knob 1 to select
Knob 3 Knob 4 Knob 5
MIDI>Sample
Note Display
— Layer Selec-
Type
tion
— — —
• A5000/A4000
Knob 5
[ Turn] MIDI Sample Layer Selection
Determines whether or not multiple samples (sample
banks) assigned to a note will be selected sequentially
each time a note-on message is received when the MIDI
To Sample function is used.
[Range] atAllPages, onlyAtTree
• atAllPages ... This function will be active at all
times (when any display page is showing).
Multiple samples (sample banks) assigned to
a note will be selected one after the other
each
meaasge is received.
• onlyAtTree ... This function will be active only
when the Tree View dislay is showing (i.e. the
display called when Knob 1 is pressed). Multi-
ple samples (sample banks) assigned to a
note will be selected one afer the other each
time the corresponding note-on meaasge is
received. When any other display is showing
one of the samples (sample banks) assigned
to the received note will be selected, but multi-
ple samples (sample banks) will not be
selected in sequence.
• The MIDI To Sample function can be used to select a
sample or sample banks to be edited from an exter-
nal MIDI device. Refer to page 83 for details.
• These settings have no effect when the MIDI To
Sample function is turned "off."
Cursor w
Cursor
w
Knob 1 Knob 2
Turn
Cursor/Page —
action
Press
Tree View —
action
Knob 1
Same function as Cursor
Knob 3
[ Turn] Function
This setting selects whether the A5000/A4000 activates
the "first" function or the "last" (most recent) function
when you switch to a different mode.
[Range] 1stFunction, LastFunction, HoldFunction
• 1stFunction ... When you switch to a different
mode, the A5000/A4000 automatically moves
into the function identified by the first (left-
most) function key.
time the corresponding note-on
Knob 3 Knob 4 Knob 5
Function — Page
— — —
q
(page 83).