Yamaha A4000 Owner's Manual page 207

• ProgramParameters ... Copies all parameters for
a specifed program to a different program.
• ProgramMerge ... Allows the samples or sample
bank used in the source program to be used
by the destination program, and copies all
EASY EDIT settings with the merged sam-
ples/sample bank.
The samples, sample banks, and sample set-
tings originally used with the destination pro-
gram will remain unaffected.
• Effect ... Copies only the effect settings from a
specified program to a different program.
• StepWave ... Copies only the StepWave settings
from the Program LFO of a specified program
to a different program.
• SampleParameters ... Copies the parameters
from a specifed sample (sample bank) to a dif-
ferent sample (sample bank). The following
parameters are NOT copied: Original Key
(page 128), Pitch Fine (page 130), Low Key
(page 154), High Key (page 154), Loop Mode
(page 123), Wave Start Address (page 120),
Wave End Address (page 120), Loop Start
Address (page 121), Loop End Address (page
122).
Knob 5
[ Press] EXEC&CONT
Press this knob to call the copy confirmation display.
Press Knob 5 (YES) to actually execute the copy opera-
tion.
Cursor w
(when the CopyType is ProgramParameters, Program-
Merge, or StepWave/Effect)
Cursor
w
Knob 1 Knob 2
Turn From
Cursor
action Program
Press
EXEC —
action
Knob 1
Same function as Cursor
Knob 2
[ Turn] From Program
Selects the source program.
[Range] 001 — 128
Knob 3 Knob 4 Knob 5
From Effect To Program To Effect
— — EXEC&CONT
q
(page 206).
Knob 3
[ Turn] From Effect
Selects the source effect. This can only selected when
the Copy Type is set to Effect.
[Range] E1 — E6 (E1 — E3 on the A4000)
Knob 4
[ Turn] To Program
Selects the destination program.
[Range] 001 — 128
Knob 5
[ Turn] To Effect
Selects the destination effect. This can only selected
when the Copy Type is set to Effect.
[Range] E1 — E6 (E1 — E3 on the A4000)
[ Press] EXEC&CONT
Press this knob to call the copy confirmation display.
Press Knob 5 (YES) to actually execute the copy opera-
tion.
Cursor w
(when the CopyType is SampleParameters)
Cursor
w
Knob 1 Knob 2
Turn
Cursor —
action
Press
EXEC —
action
Knob 1
Same function as Cursor
Knob 3
[ Turn] From Sample
Selects the source sample or sample bank.
All samples (sample banks) in memory can be selected.
Knob 5
[ Turn] To Sample
Selects the destination sample or sample bank.
All samples (sample banks) in memory can be selected.
If a sample has been selected via the From Sample
parameter only samples can be selected. If a sample
bank has been selected via the From Sample parameter
only sample banks can be selected.
[ Press] EXEC&CONT
Press this knob to call the copy confirmation display.
Press Knob 5 (YES) to actually execute the copy opera-
tion.
A5000/A4000 •
About the COMMANDS
Knob 3 Knob 4 Knob 5
From
— To Sample
Sample
— — EXEC&CONT
q
(page 206).
207
Chapter 9 COMMAND