Yamaha A4000 Owner's Manual page 186

7. DISK COMMANDS
Knob 4
[ Turn] Disk
Selects the disk from which the OS file is to be loaded.
[Range] All connected/mounted MS-DOS format hard
disks and floppy disks, and ISO9660 format CD-
ROM disks.
• If the OS file is stored in the disk's root directory the
OS information will appear on the display.
• OS files stored in any directory other than the root
directory will not be recognized.
• If a connected SCSI or IDE device (hard disk, ZIP
drive, etc.) cannot be selected, go to the disk select
display (DISK-DISK-Disk) and check the mount/
unmount status and SCSI ID settings of the device
(page 173).
Knob 5
[ Press] EXEC&CONT (Execute & Continue)
Press this knob to call the OS load confirmation display.
Press Knob 5 (YES) to actually execute the OS load
operation.
• The LOAD OS operation cannot be executed if the
OS file information does not appear on the display.
186
Chapter 7 DISK Mode
• A5000/A4000