Yamaha A4000 Owner's Manual page 174

DISK-DISK
• Be sure that the ID that you set here does not match
the ID of any other device in your system — since all
devices must have different IDs. To check for cur-
rently used IDs, use the Disk Select page (DISK-
DISK-Disk) (page 173).
• The ID that you set here does not become effective
until you switch the power off and then back on.
• There is generally no need to change the ID from its
factory setting (ID 6). You will need to make this
change only if you are connecting up another SCSI
device that has a fixed (unchangeable) ID of 6.
Knob 3
[ Turn] Top Partition
When mounting an AKAI format disk, only the 8 partitions
following the partition specified by this parameter are
mounted.
[Range] 1 — 99
• When importing data from a disk created on an AKAI
S-series sampler which has 9 or more partitions, use
the Top Partition parameter to specify the partition
containing the data you want to import.
• This parameter only works with AKAI format disks.
Knob 4
[ Turn] Play&Load
Determines whether data will be played while it is being
loaded.
[Range] off, on
• off ... No playback during load.
• on ... Playback during load is possible. When this
feature is on loading will be slower than when
it is off, regardless of whether the data is
played or not.
174
Chapter 7 DISK Mode
• A5000/A4000