Volume - Yamaha A4000 Owner's Manual

DISK-VOLUME

4. VOLUME

VOLUME allows selection and management of volumes on
the currently selected disk.
• See "7. DISK COMMANDS" on page 177 for more information on
disks, partitions, and volumes.
Press the [DISK] button and then the [F4] button to go to the
VOLUME display.
1 display page is provided: Volume.

Volume

[DISK] Button [F4]Button
The functions provided here make it possible to select vol-
umes for saving or loading data, rename volumes, create new
volumes, and load all data contained in the selected volume.
• Only 1 volume can be created on a floppy disk. Floppy disk vol-
umes are created automatically when the disk is formatted. Floppy
disk volumes have a fixed name — "FD VOLUME" — which cannot
be changed.
Knob 1 Knob 2
Turn
— Disk
action
Press
Tree View NEW VOL
action
Knob 1
[ Press] Tree View
Calls the Tree View display (page 83).
Knob 2
[ Turn] Disk
Selects the floppy disk, hard disk, or other storage media
on which a volume is to be selected or created. When a
disk is selected, all volumes it contains are listed on the
right side of the display. When a hard disk, CD-ROM drive
or similar storage device is selected, the SCSI ID number
or IDE M/S (Master/Slave) status of the device is shown
to the right of the disk name.
[Range] All installed/connected disks.
• If a connected SCSI or IDE device (hard disk, ZIP
drive, etc.) cannot be selected, go to the disk select
display (DISK-DISK-Disk) and check the mount/
unmount status and SCSI ID settings of the device
(page 173).
[ Press] NEW VOL
Creates a new volume on the currently selected disk.
Newly created volumes are automatically given the name
"NewVolume (number)." Press Knob 4 to change the vol-
ume name.
• New volumes cannot be created on floppy disks.
172
Chapter 7 DISK Mode
to select "DISK-Volume"
Knob 3 Knob 4 Knob 5
— Volume —
DELETE RENAME... LOAD
• A5000/A4000
Knob 3
[ Press] DELETE
Deletes the selected volume and all files it contains from
the disk. A confirmation display will appear when the
knob is pressed. Press Knob 5 (>YES) to actually exe-
cute the delete operation.
Knob 4
[ Turn] Volume
Selects a volume.
[Range] All volumes on the selected disk.
[ Press] RENAME...
Calls the display which allows entering a new name for
the selected volume. see page 81 for details on character
entry.
• The volume on a floppy disk cannot be renamed.
Knob 5
[ Press] LOAD
All data in the currently selected volume — programs,
samples, sample banks, and sequences — will be
loaded. Previously exisiting programs, samples, sample
banks, and sequences in the sampler's memory will be
erased and replaced by the new data. When the knob is
pressed a confirmation display will appear. Press Knob 5
(>YES) to actually execute the load operation.