Table of Contents
Advertisement
PROGRAMMINGPROCEDURES
SECTION 200-255-307
FEBRUARY1992
TABLE7-1
Procedure
-
Attendant
Data Block
Authorization
Procedure
must be completed.
If an OK response
is received,
proceed
as follows:
NOTES:
(continued)
1. Entries of 6 and 8 are allowed
only in the Business
mode.
2. Designates
the specific kind of paging
accessed
by the m
button.
/NT
= Expanded
Internal
Group Paging
(Group 0).
EXT
= External All Paging (Zones 0 - 4).
N
= External
Paging
to Zone N (0 - 4).
ALL
= Expanded
Internal
Group Paging and External
All Paging.
NONE
= No Internal
or External Paging Access.
3. If '7"' (yes) is entered,
all calls will be directed
to the attendant
console
according
to the priority
defined by the PR1 - PR5 prompts.
If "N" (no) is entered,
all calls will be directed
to the attendant
console
on a first in/first out priority basis.
4. If "Incoming Call Priority" is selected
(PI?/ = Y), the current priority table (PR 1 - PR5) will be called
up and printed.
5. Used to change
the "Incoming
Call Priority" tab/es (PRl - PR5). NNN = Type of call (CO, FX, T/E,
WAT, OPR, RCL, HLD, TIM, LNl, LN2, INT, SER[Business
mode only]).
7-2
Advertisement
Chapters
Table of Contents
