Print Access Code Data Block (Table 6-2) - Toshiba Perfecptione Installation And Maintenance Manual

PROGRAMMINGPROCEDURES
SECTION 200-255-306
FEBRUARY1992
2. Print Access Code Data Block (Table 6-2)
2.01 To use the Print Access Code Data Block
(PACD Program):
l
Perform the Authorization Procedure (Level 1 or
a
Enter: PACD (in response to the OK prompt).
l
When the REQ prompt is received after the
program is loaded:
Enter: PRT.
l
The Access Code Data Block will be output in the
same format as it was input in the DACD Pro-
gram.
Example: REQ PRT
ACB *7
CBR **7
CFD *9
CFR **9
etc.
l
REQ will be prompted again once the printout is
complete.
Enter: pm
q
(to exit the program).
TABLE 6-2
Procedure - Print Access Code Data Block
Authorization Procedure must be completed. If an OK response is received, proceed as follows:
ITEM
PROMPT
OK
PACD
- DISK LOADING -
USER ENTRY NOTE
I
=Q
PRT 1
- EXECUTE -
RElQ 1
NOTES:
response possible is: PRT = Outputs Access Code Data Block.
= Ignore line entered.
Backspace.
Stop printing and return to REQ.
Exit program.
6-5