Motorola KEY 3000 User Manual page 251

KVL 3000 User's Guide
Viewing/Loading OTAR
Configuration
Parameters
(continued)
Note If you select
TGTRSI, the LOAD selec
tion will not appear until
you have entered the first
digit of the RSI.
If you select KMFRSI or
MNP , the KMFRSI or MNP
currently stored in the
KVL 3000 (using SETUP
as described in Setting
Up KVL 3000 for KMF
Operation in this chap
ter) will be displayed. You
may edit this number as
desired.
7-40
4. Use the or keys to navigate to
TGTRSI, KMFRSI, or MNP (as desired),
then press to select the desired
parameter. The following screen will
appear (TGTRSI shown):
ENTER THE
TGTRSI>
J
5. Enter the desired TGTRSI (or KMFRSI or
MNP), then press
The KVL 3000 will load the entered
parameter into the
Messages will appear in the display to
indicate the status of the process.
z End of This Procedure z
to select LOAD.
target device.
ASTRO 25 Operation