Motorola KEY 3000 User Manual page 134

KVL 3000 User's Guide
Interpreting Error
Messages
(continued)
8-8
Internal Error Messages
When this type of error occurs, the display will
show KEY LOAD FAILED (or other generic error
message). Press and hold the Del/Shift key,
then press the E key to display a more detailed
error message.
For most of the detailed error messages, the
cause is a faulty cable connection between the
KVL 3000 and the target device. Make sure the
connection is good and try the operation again.
If it still fails, contact your service center.
However, three of the detailed messages
(related to sharing keys between two KVLs)
have other causes and remedies. These error
messages are shown on the facing page, along
with probable causes and remedies.
ASN Operation