Motorola KEY 3000 User Manual page 151

Key variable loader
Table of Contents

Advertisement

KVL 3000 User's Guide
Perform Initial
Programming
3-2
Introduction
Before using your KVL 3000 to enter and load
encryption keys, several parameters that
determine how the KVL 3000 operates can be
programmed. The parameters are divided into
two categories:
D User Preference
D System Dependent
Instructions for programming these parameters
begin on the next page.
Note Many of the parameters described in this
chapter are also accessible from the CONFIG
menu in ASN operating mode. Making changes
to one of these common parameters from either
ASN or ASTRO 25 operating mode affects the
setting for both modes. For example, if you are
in ASTRO 25 mode and change the Power Down
Timeout setting (TIMEO) to 60 seconds, the
timeout will also be 60 seconds when in ASN
operating mode.
The common parameters are as follows:
D PASSWD
(setting
Operator passwords)
D DATE (setting month, day, year)
D TIME (setting hours, minutes, seconds)
D SHARE (on or off)
D SOUND (on or off)
D TIMEO
(setting
seconds)
D BAUDR (selects baud rate for modem
communications)
D FIPS (on or off)
D SYSKEY (allows System Key to be
entered; for DVI XL algorithms only)
D DIAL (setting Tone or Pulse dialing)
Supervisor
and
timeout
period
in
ASTRO 25 Operation

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents