Motorola KEY 3000 User Manual page 164

Perform Initial
Programming
(continued)
ASTRO 25 Operation
Chapter 3 Performing Initial Programming
System Dependent Parameters
(continued)
3. Press to select YES. The following
screen will appear.
SYSKEY
J
BYTE 01
4. Enter the 128 digit (64 bytes) System Key.
The display will show SLOT FILLED when
completed. Press the Enter key.
5. The display will show BUSY... ERASING
KEYS while the keys and UKEK are
erased.
6. When finished, the following screen will
be displayed to indicate that the new
System Key was accepted (overwriting
the previous System Key).
THE SYSKEY
IS READY.
EDIT DEFAULT
3-15